I Product Specification:
Product Name: Juice Cup. Operating current:10-12A
Product capacity: 380ML. Product Size: 78 * 78 * 240MM
Product Material: Food Grade PC. Base material: Food Grade ABS
Working voltage: 7.2V. Input voltage: DC 5V
Material Blade: Stainless steel 304.
Motor speed: No load 22000 revolving speed / min ± 15%.Load 15000 revolving speed / min ± 15%
II Button Introduction
1. Short press “on-off”, motor will start working while LED light flash in flowing water type.
2. Motor will only work for 5 seconds while under the condition of NO LOAD. LED light will indicate the current power level for 5 seconds before light-off.
3. Motor will work for 30 seconds while under the condition of LOAD. LED light will indicate the current power level for 5 seconds before light-off.
4. Motor will stop working immediately while the blade is stuck. LED light will indicate the current power level for 5 seconds before light-off. After 3 seconds, short press “on-off”, the motor will work again. If the blade is stuck, please shake the cup gently till problem being solved.
5. Motor will stop working immediately while the limiting stopper separates from the power switch.
1. Cut the fruit into small pieces for about 1.5 * 1.5 cm small pieces. Remove the nut, the thick peel and hard coat.
2. The liquid filled in should not exceed 70% of the total capacity(380ml) of the cup.
3. Put the juicer in a flat surface after the motor starts working till it is done.
4. Please wait 5 minutes till the motor cools down before using the juicer for the second time to prevent the motor from overheating for a continuous operation.
5. Do not wash the whole product by water directly. Do not soak the bottom part installing with motor in the water in case of electronic component damage.
6. Safe design: motor will stop working while parts displacement exists.
Your payment information is securely processed. I don't want to do that, storing stored data.